Nuvo NV-T2SIR - Manual (Page 23)

18
This will move the highlight to the next zero.
Repeat the steps to set the next number.
When all four numbers have been entered,
the channel will be accessible. The default
5555 code must be entered to reach the
second menu level which allows a new code
to be set, and a list of the available SIRIUS
channels allows the specific channels to be
selected for parental lock.
Skipped Channels: Undesired SIRIUS channels
can be selected from this list of channels and
removed from tuning. To select a channel,
move the highlight to that channel listing and
touch the OK button. This will place a check
mark next to that station. When checked, it
will not appear when browsing or tuning
through channels.
V. Using the NuVo Tuner Configurator
Software
The Configurator Software is tabbed, wizard style software that
easily moves you through the T2SIR setup and implementation
as a NuVoNet source or as a standalone source controllable by
IR or Serially. Within the Configurator you can setup the source
address and presets for an installation and download the
information to the T2SIR's flash memory prior to its
installation. Its non-volatile memory will retain the
configuration indefinitely while the Tuner is unplugged.
1.0 Start (Fig. 34)
The start tab allows you to load an existing configuration,
create a new one, or retrieve and edit a configuration from the
Tuner. When the computer is connected to the Tuner via its
RS232 port, you can click on “Retrieve Configuration from
Tuner” and make any necessary edits. When the edited version
is downloaded to the Tuner, the previous configuration will be
overwritten.
To start a new configuration or open an existing configuration,
click on the “Load Existing or Create New Configuration”
button. The “File Name” field allows you to give a new
configuration a new name.
Fig. 34
Fig. 35
2.0 Config (Fig. 35)
The Config tab is for the initial setup, which determines basic
Tuner operation. Within the Config Tab the first step is to
establish the correct Tuner model being configured. The
choices are NV-T2FXG, NV-T2DXG, NV-T2FXG, NV-T2SIR, NV-
T2FAM, and NV-T2DAB. To work with the NV-T2SIR, make that
model choice from the “Tuner Mode” menu.