Digital setup, Audio setup, Identification – Nintendo Aquos LC-32D44U User Manual

Page 26: Software update

Advertising
background image

26

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Identification

Audio Setup

Software Update

[PCM]

Digital Setup

Example

1

Press MENU to display the MENU screen, and then

press

c/d to select "Digital Setup".

2

Press

a/b to select a specifi c adjustment item,

and then press ENTER.

3

Press

a/b (or c/d) to select the desired setting,

and then press ENTER.

4

Press MENU to exit.

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal

in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio

signal in Dolby Digital form. It reproduces sound from
surround program of digital.

Identifi cation

The current version of the TV software is displayed.

On-Screen Display Menu

Software Update

This function allows software updates by inserting
a USB memory device with the update fi le into the
SERVICE terminal on the TV.
To check for the availability of a software update, visit
www.sharpusa.com. If you have any questions, please
call 1-800-BE-SHARP (800-237-4277).

CAUTION

Do not remove the USB memory device or unplug the
AC cord while the software is being updated.
Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.

Insert the USB memory device with the update fi le
into the SERVICE terminal on the TV.

Press MENU to display the MENU screen, and
then press

c/d to select “Digital Setup”.

1

2

Press

a/b to select “Software Update”, and then

press ENTER.

If you have already set the Secret No., go to step 4.

Audio Setup

Software Update

Identification

[PCM]

Digital Setup

Input the 4-digit secret number by using 0–9.

Digital Setup

Secret No.

a

a

a

a

Press ENTER to start checking the data in the
USB memory device.

Insert the USB memory device containing

the software update file.

OK

3

4

5

Advertising
This manual is related to the following products: