Nintendo Aquos LC-32D44U - Manual (Page 7)

7
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may prevent proper operation.
30º 30º
30º
30º
17´ (5 m)
Remote Control sensor
■ Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
• The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
IMPORTANT:
The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS television.
If the POWER indicator on the AQUOS television still does not light up, press POWER on the remote control to turn the power
on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
QUICK REFERENCE
Attach your antenna to the back of the AQUOS
television. (See page 8.) Bundle the cords properly with the cable clamp .
How to turn on the AQUOS television for the fi rst time.
A) Press POWER on the AQUOS television.
Connect the AC plug for the AQUOS television into
the AC outlet.
B) The POWER indicator on the front of the
AQUOS television lights GREEN.
• Speakers cannot be detached from the TV.
• TV angle cannot be adjusted.
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
1
2
3
4
QUICK INSTALLATION TIPS
AC outlet
LC-32D44U LC-37D44U
POWER
POWER
indicator