Figure 3-4 – Nikon MOTORMESH 4300 User Manual
Page 34
Advertising
Chapter 3: Device Configuration
July 2007
3-4
7
Note that after initial Probing during the Add New Device process, the 802.11 b/g Radio and Mesh are
both ENABLED by default, and the 802.11 a Radio and Mesh are both DISABLED by default.
Figure 3-4
Examining Initial Device Defaults in MeshManager
8
To configure an 802.11 b/g mesh network, a license key is not required. The only necessary steps are (1)
Probe device, (2) configure Device Name and Location, and (3) select the Add button to finalize the
configuration. DO NOT enter any License Key or Membership VLAN information.
Advertising