Figure 3-18, Promote / demote dialog -14, Figure 3-19 – Nikon MOTORMESH 4300 User Manual
Page 44
Chapter 3: Device Configuration
July 2007
3-14
2
From the newly opened Promote/Demote dialog box, select Yes to continue demoting the device, or select
No.
IMPORTANT NOTE: Careful consideration should be taken prior to demoting an IAP with respect to
VLAN configurations. Precautions must be taken to prevent a loop condition from occurring in the
network.
IMPORTANT NOTE: When a device is demoted it will stop invoking its backhaul detection routines
even if the device’s Backhaul feature is enabled.
IMPORTANT NOTE: The demoted device will be re-started as part of the change.
Figure 3-18
Promote / Demote Dialog
3
The successfully demoted IAP is now shown in the MWR group in MeshManager’s Device Tree.
Figure 3-19
Demoted IAP Device shown moved into a MWR Group