Nilfisk-Advance America GW 235 - Manual (Page 8)

8
PLEASE READ THESE ESSENTIAL INSTRUCTIONS
(Only applicable to UK)
THIS VACUUM CLEANER is designed, developed
and rigorously tested to function efficiently and safely
when properly maintained and used in accordance
with the following instructions. These instructions have
been prepared with safety and efficiency paramount.
THE MACHINE OPERATOR must understand these
instruct- ions for use, and be made aware of any
relevant regulations and legislation in force at the time
of use.
CAUTION - This machine is not suitable for use in
explosive or inflammable atmospheres or where such
atmospheres are likely to be produced by the presence
of volatile liquid or inflammable gas or vapour.
CAUTION - In no circumstances should the power
supply cord be wrapped around fingers or any part of
the operators person.
CAUTION - The electrical supply plug must not be
subjected to undue stress by pulling on the power
supply cord.
Your MACHINE must only be connected to an electrical
supply of the same voltage and frequency as indicated
on the rating plate. Ensure that the plug fitted to the end
of the power supply cord is suitable for your supply
socket, if not refer to the information contained in
'Electrical Connections', or consult a qualified
electrician. The electrical installation from which the
supply is drawn must be maintained to current Institute
of Electrical Engineers wiring regulations.
REGULAR SERVICING and INSPECTION of your
machine must be carried out by suitably qualified
personnel in accordance with relevant legislation and
regulations. In particular, electrical tests for earth con-
tinuity, insulation resistance, and condition of the flex-
ible cord should be checked frequently.
In the event of any defect, the machine MUST be
withdrawn from service, completely checked and re-
paired.
Trained Service Engineers will be pleased to carry out
on site servicing on a regular or as requested basis, to
ensure the continuing safety and efficiency of your
machine.