Step 2: security configuration successful, Step 3: adapter is connected, Step 4: rename adapter – NETGEAR PTV1000 User Manual
Page 16: Step 2: security configuration successful -7, Step 3: adapter is connected -7, Step 4: rename adapter -7
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
1-7
v1.0, January 2010
Step 2: Security Configuration Successful
The Security configuration successful TV message indicates a correct security code entry.
Step 3: Adapter is Connected
After the laptop connects to the adapter, the TV shows Connected. Please wait. This message
appears for only a few seconds. If the TV reads Connected. Please wait for more than 1 minute,
the connection attempt failed. For help, see the
“Common Solutions to Many Issues” on page
Step 4: Rename Adapter
After entering the security code, you may type a new descriptive name for the adapter.
Figure
1-5
The example above has the name My Living Room. This new name will be used in all future
connections from the laptop to this adapter. If you have more than one adapter, changing the
default name makes it easier to identify each adapter. When finished click the Continue button.
Note: The valid character set for adapter names are upper and lower case letters A
through Z, numbers and punctuation marks, also defined as ASCII characters 32
through 126.