NETGEAR PTV1000 - Manual (Page 28)

Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual
2-10
v1.0, January 2010
How do I Clear the Adapter Memory?
Clearing the adapter’s memory erases security settings and the user modified adapter name. This is
helpful if you choose to sell your adapter, or if a neighbor came to your house and connected to
your adapter, but now you do not want them to accidentally connect from their house.
To clear the adapter’s memory, press and hold the Reset button on the back of the adapter for more
than 5 seconds or until the LED starts blinking. Clearing the adapter memory requires you to enter
the security code displayed on the TV in order to connect again.
Can I Close the Laptop Lid and Still Use Intel Wireless Display?
Closing the lid of the laptop may put the system to sleep or turn it off, and as a result, end the Intel
Wireless Display session. To close the lid and continue using the application:
1. Click the Windows Start icon and type Closing the lid in the search field.
2. Click the Change what closing the lid does link.
3. Next to the When I close the lid heading and under both the On battery and Plugged in
headings, select Do nothing.
4. Click the Save changes button.
What are Adapter Properties?
Adapter Properties Definitions
• Adapter Name. This is either the default factory name or the name you choose in the initial
set up process. It is okay to change the name at anytime. Just type a new name. If the default
“Name” is deleted and the field is left empty, the application will restore the name to the
previous value. NOTE: The valid character set for adapter names are upper and lower case
letters A through Z, numbers and punctuation marks, also defined as ASCII characters 32
through 126.
• Network address. This is the IP (Internet Protocol) address.
• Adapter ID. A preset and unchangeable number set by the adapter.
• Adapter Model. This is the model name of the adapter currently connected.
• Adapter firmware version. The version of the application. If a Web update is required, click
the Update Available button.