NAD L 76 - Manual (Page 10)

ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
10
AUDIO OPERATIONS
NOTES
The following points apply throughout the “Audio Operations”
sections unless otherwise noted. To simplify explanations,
instructions refer to names of buttons and controls on the front
panel, making no mention of the use of remote control unit.
PRIVATE LISTENING
For private listening, insert the headphones (1/4-inch plug) into the
PHONES jack.
NOTE
When playing movie or music with 5.1 channels through Dolby
Digital or DTS, multi-channel signal will be automatically down-
mixed to 2-channel stereo. VFL Display will show ‘Digital stereo’ icon
or ‘DTS stereo’ icon. The output via speakers will be muted.
MUTING BUTTON (ON THE REMOTE CONTROL UNIT)
Press this to mute the sound from the speakers and headphones when
answering the telephone, etc. To restore the original volume, press the
MUTING button again. While Muting is engaged, the Display will say
“MUTE”.
SLEEP TIMER OPERATION
SLEEP Timer Function (on the Remote Control Unit)
This function allows you to preprogram the receiver to switch its own
power off automatically. You can then enjoy the audio/video system for
a specified amount of time without having to worry about turning the
unit off later. Each press of the SLEEP button changes the time
indication by 10 minutes.
PHONES
To let the remaining time (until power off) appear on the display while
the sleep timer is engaged, press the SLEEP button once.
WHEN TO USE RESET SWITCH
1 When this system is subjected to an electrical shock.
2 When the power is irregular. In these cases, try the following (in
power standby mode.):
Press the RESET switch lightly once or twice with a pencil or ballpoint
pen
NOTE
When the RESET switch is pressed, all the memory will be cancelled.
SLEEP 90 SLEEP 80
Released condition
SLEEP 10
MUTE
SLEEP
Rear Panel