Part identification chart – NordicTrack NTB12920 User Manual
Page 5
Advertising
5
M10 x 115mm Carriage Bolt (20)
M6 Washer (26)
M10 Nylon Locknut (23)
M12 Nylon Lockut (24)
M10 x 75mm Button Head Bolt (19)
M6 x 16mm Screw (18)
M6 x 68mm Screw (27)
M12 x 87mm Button Head Bolt (17)
M10 x 63mm Button Head Bolt (21)
M10 Washer (22)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 10 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
Advertising