NEC 78K/0 Series - Manual (Page 86)

86
CHAPTER 5 EXPLANATION OF INSTRUCTIONS
User's Manual U12326EJ4V0UM
Move Single Bit
MOV1
1 Bit Data Transfer
[Instruction format] MOV1 dst, src
[Operation] dst ← src
[Operand]
Mnemonic Operand(dst,src) Mnemonic Operand(dst,src)
MOV1 CY, saddr.bit MOV1 saddr.bit, CY
CY, sfr.bit sfr.bit, CY
CY, A.bit A.bit, CY
CY, PSW.bit PSW.bit, CY
CY, [HL].bit [HL].bit, CY
[Flag]
dst = CY PSW.bit In all other cases
Z AC CY Z AC CY Z AC CY
Ч Ч Ч
[Description]
• Bit data of the source operand (src) specified by the 2nd operand is transferred to the destination operand
(dst) specified by the 1st operand.
• When the destination operand (dst) is CY or PSW.bit, only the corresponding flag is changed.
[Description example]
MOV1 P3.4, CY; The CY flag contents are transferred to bit 4 of port 3.