Ryobi MS181 - Manual (Page 12)

Page 12
3 0
1 5
0
1 5
3 0
4 5 31.62
22.5
22.5
4 5
3 0 3 0
15 15
15
30
4 5
22.5
31.62
22.5 22.5
31.62 31.62
R O T A T I O N
4 5
3 0 3 0
15 15
15
30
4 5
22.5
31.62
22.5 22.5
31.62 31.62
R O T A T I O N
KNOW YOUR COMPOUND MITER SAW
See Figure 5.
Before attempting to use your saw, familiarize yourself
with all operating features and safety requirements.
WARNING:
Do not allow familiarity with your saw to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
8-1/4 in. (209.6 mm) BLADE
A 8-1/4 in. (209.6 mm) saw blade is included with your
compound miter saw. It will cut materials up to
2-1/16 in. (52.4 mm) thick or 5-1/2 in. (139.7 mm)
wide, depending upon the thickness of the material
and the setting at which the cut is being made.
CUTTING CAPACITIES
When the miter angle (miter table) is set at 0 ° and
the bevel angle is set at 0 ° :
Your saw will cut materials up to a maximum of
5-1/2 in. (139.7 mm) wide x 2-1/16 in. (52.4 mm)
thick.
When the miter angle (miter table) is set at 45 ° and
the bevel angle is set at 0 ° :
Your saw will cut materials up to a maximum of
3-3/4 in. (95.3 mm) wide x 2-1/16 in. (52.4 mm) thick.
When the miter angle (miter table) is set at 0 ° and
the bevel angle is set at 45 ° :
Your saw will cut materials up to a maximum of
5-1/2 in. (139.7 mm) wide x 1-1/2 in. (38.1 mm) thick.
When the miter angle (miter table) is set at 45 ° and
the bevel angle is set at 45 ° :
Your saw will cut materials up to a maximum of
3-3/4 in. (95.3 mm) wide x 1-1/2 in. (38.1 mm) thick.
Fig. 5
LOWER
BLADE GUARD
UPPER
BLADE GUARD
SAW ARM
LOCK-OFF
BUTTON
FENCE
MITER TABLE
BEVEL SCALE
BEVEL
LOCK KNOB
SWITCH
TRIGGER
THROAT PLATE
NO HANDS
ZONE LABEL
"NO HANDS ZONE"
BOUNDARY LINE
FEATURES
MITER SCALE
MITER
TABLE FRAME
SPINDLE LOCK
BUTTON
DUST BAG
CARRYING HANDLE
DUST GUIDE