Ryobi MS181 - Manual (Page 13)

Page 13
Fig. 9
3 0
1 5
0
1 5
3 0
4 5 31.62
22.5
22.5
0
1 5
3 0
4 5 31.62
22.5
FEATURES
CARRYING HANDLE
See Figure 6.
For convenience when carrying or transporting your
miter saw from one place to another, a carrying
handle has been provided on top of the saw arm as
shown in figure 6. To transport saw, remove battery
pack, then lower the saw arm and lock it in the down
position. Lock saw arm by depressing the lock pin.
Fig. 6 LOCK PIN
SAW ARM LOCKED
IN DOWN POSITION
CARRYING
HANDLE
SPINDLE LOCK
BUTTON
SPINDLE LOCK BUTTON
See Figure 8.
A spindle lock button has been provided for locking
the spindle which keeps the blade in your saw from
rotating. Depress and hold the spindle lock button
while installing, changing, or removing the blade only.
LOCK-OFF BUTTON
See Figure 9.
The switch trigger is equipped with a lock-off button to
reduce the possibility of accidental starting.
To release lock-off feature:
■ Depress lock-off button (1).
■ While holding lock-off button pushed in, (2)
depress switch trigger.
■ Release lock-off button (3).
Note: The spring loaded button will spring back
into the lock-off position when the switch trigger is
released.
MITER TABLE CLAMP
See Figure 7.
The miter table clamp securely locks your saw at
desired miter angles.
5 0 1 3
Fig. 8
Fig. 7
SAW ARM
LOCK PIN
MITER TABLE
CLAMP (IN
LOCKED
POSITION)
UNLOCK
LOCK
5
0
5 4 31.62
1 3
5
0 1
3
3 0
1 5
0
1 5
3 0
4 5
31.62
22.5
22 .5
2
3
1
SWITCH
LOCK-OFF
BUTTON