Ratoc Systems CB31U - Manual (Page 56)

MS-DOS
54
5. How to install Windows 95/98
5. Installing Windows 95/98
This chapter explains how to make a startup floppy disk, how to access to a SCSI CD-ROM
connected to the CB31U with the startup floppy disk. If you can accees to a SCSI CD-ROM
with the startup floppy disk, you can install Windows 95/98/Me from the SCSI CD-ROM connected
to the CB31U.
If you are not accustomed to DOS command, refer to Chapter 5-1.
If you are accustomed to DOS command and use Windows 95, refer to Chapter 5-2.
If you are accustomed to DOS command and use Windows 98, refer to Chapter 5-3.
5-1. Making a startup floppy disk with utility
With startup disk tool named MKDISK.EXE, you can make a startup floppy disk with which you can
access to a SCSI CD-ROM.
NOTE:
1.You can not use RECOVERY CD which may be bundled in your computer with this startup
disk tool named MKDISK.EXE. Contact to your PC manufacturer when you install the
RECOVERY CD to install OS.
2.This MKDISK.EXE does not work on Windows Me. You can use this tool with Windows95,
Windows 98 only.
To access to a SCSI CD-ROM connected to the CB31U with the startup floppy disk, follow these steps:
1.Insert a floppy disk.
2.Open My Computer and click the floppy disk icon with the right button.
3.Select Format.