Ratoc Systems CB31U - Manual (Page 65)

W
indows2000
6. How to install Windows 2000
63
6-2. Install a new copy of Windows 2000
Follow these steps through:
1.Format the HDD where you want to install Windows2000 first.
2.Start setup program of Windows2000 from the SCSI CD-ROM connected to the CB31U.
3.When setup starts,you can see two ways to install Windows2000 on the screen:
-[Upgrade to Windows2000(Recommended)]
-[Install a new copy of Windows2000(Clean Install)]
4.Select [Install a new copy of Windows2000(Clean Install)].
5. After typing in the Product Key, click [Advanced Options] on the [Select Special Options] screen
saying [To review or change the default Setup options for copying files,click (Advanced
Options)].
6.Check [Copy all setup files from the setup CD to the hard drive] on the [Advanced Options]
screen and click [OK] button.
7.Install Windows 2000, following the instructions.
8.Before you restart your system, remove the CB31U.
9.When you finish installing it,set up the CB31U if you need it.
6-3. Install Windows 2000, using Windows 95/98 startup disk
Follow the steps below:
1. Make a Windows 95/98 startup floppy disk, refering Chapter 6-2 or 6-3 and have your CD-ROM
recognized by the Windows 95/98 startup floppy disk.
2. Format your internal HDD, if necessary.
3. Start [WINNT.EXE] file in the [i386] directory in the Windows2000 CD-ROM.
4. Install Windows 2000, following the instructions.
5. Before you restart your system, remove the CB31U.
6. When you finish installing it,set up the CB31U if you need it.