Preparation, Installing and removing the battery pack – Radio Shack 19-902 User Manual

Page 10

Advertising
background image

10

PREPARATION

Before you use the transceiver, you must be properly
licensed by the FCC. If you already have a GMRS li-
cense, you can immediately use the transceiver.

INSTALLING AND REMOVING
THE BATTERY PACK

Caution: Do not remove the plastic wrap from the
battery pack. Doing so can permanently damage the
battery.

1. Be sure the transceiver is turned off.

2. Unlock the battery compartment cover latch on

each side. (The orange tabs should be visible.)
Then slide the cover down and lift it off.

Battery
Compartment
Cover

Cover
Latch

19-902.fm Page 10 Tuesday, August 3, 1999 2:03 PM

Advertising