Radio Shack 19-902 - Manual (Page 21)

21
4. Select any one CTCSS code found in the table
on Pages 22 and 23, then find the correspond-
ing switch positions in the tables.
5. With a pointed instrument, such as a pin, place
the dip switches in the positions that match the
desired tone.
For example:
Note: Setting Switch 8 to the down position dis-
ables the CTCSS feature. You must set the
switch to the up position to turn on CTCSS.
6. After setting your CTCSS code, replace the bat-
tery tray, battery pack, and battery compartment
cover, then turn on the transceiver.
1 2 3 4 5 6 7 8
Up
Position
Down
Position
19-902.fm Page 21 Tuesday, August 3, 1999 2:03 PM