Roland SP-404SX - Manual (Page 9)

9
D
eu
tsc
h
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
English
Turning the Power On
NOTE
Once the connections have been completed, turn on power to your various devices in the order specifi ed . By turning on
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices .
1. Minimize.the.volume.of.the.SP-404SX.and.your.speakers .
Turn the SP-404SX’s [ VOLUME] knob all the way to the left .
2. Turn.the.SP-404SX’s.[.POWER].switch.ON .
NOTE
This unit is equipped with a protection circuit . A brief interval (a few seconds) after power up is required before the unit will
operate normally .
3. Turn.on.the.power.of.your.speakers .
4. Adjust.the.volume .
While striking the pads of the SP-404SX to produce sound, slowly turn the [VOLUME] knob toward the right, and adjust the
volume on the SP-404SX and on your speakers .
Turning the Power Off
1. Minimize.the.volume.of.the.SP-404SX.and.your.speakers .
2. Turn.off..the.power.of.your.speakers .
3. Turn.the.SP-404SX’s.[POWER].switch.OFF .