Rosewill RC403 - Manual (Page 3)

2
User Manual PCI 56Kbps V.92 Data/fax Voice Modem Card RC403
Installation Guide for Windows Series
98/98SE/ME/2000 and XP
System Requirements
• Computer with Pentium 200 MMX or higher processor.
• Windows 98/98SE/ME/2000 and XP Operating System.
• 20 MB Hard Disk free space or above
• Sound card for voice features
•  available PCI slot.
• CD-ROM drive.
Modem Installation
. Please turn off your computer and disconnect the power cable.
2. Please remove the cover from your computer. Please check your computer¡¦s manual for
instructions and cautions regarding the removal of covers or installation of add-in boards.
3. Please select an empty PCI slot and remove the appropriate expansion slot cover from the
computer.
4. Please insert the Internal 56k Modem into the PCI slot and secure with a screw in the
backplane.
5. Please replace the Computers cover.
6. Please insert one end of the telephone cord into the Modem¡¦s Line (top) Socket
7. Please connect the other end of the phone cord to a telephone phone point, via the supplied
adaptor (RJ) if required.
8. Please turn on your computer.
9. As Windows 98FE/98SE/2000/ME/XP starts it will detect that new hardware has been added,
and start the ¡§Add New Hardware Wizard¡¨ Click on Cancel.
0.Please insert the analog Modem communication CD into your CD-ROM drive.
. The CD should auto-start, displaying the following window. If it does not start, click on Start
- Run and type in CD:\autorun.exe (where CD is the drive letter of your CD-ROM drive.
2. Please select--Install Modem Driver. If you can not perform these procedures smoothly as
above, please perform the file directly: CD:\Autorun.exe