Rosewill RC403 - Manual (Page 8)

7
User Manual PCI 56Kbps V.92 Data/fax Voice Modem Card RC403
state of a negotiated handshake with a V.92-compliant server in V.92 Mode.
Syntax
+PMH=<value>
Defined Values
<value> Decimal number corresponding to the selected operation.
0 Modem-on-hold enabled in V.92 Mode. (Default.)
 Disabled modem-on-hold.
Result Codes
OK 0 or  in V.92 Mode
ERROR Otherwise.
Reporting Current or Selected Value
Command: +PMH?
Response: +PMH: <current value>
Example: +PMH: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +PMH=?
Response: +PMH: (<value> range)
Example: +PMH: (0,)
+PMHT – Modem-on-Hold Timer
This command controls whether or not the modem will grant or deny a modem-on-hold (MOH)
request as well as setting the MOH Timeout value.
Syntax
+PMHT=<value>
Defined Values
<value> Decimal number corresponding to selected setting.
0 Deny V.92 modem-on-hold Request (Default.)
 Grant MOH with 0 second timeout
2 Grant MOH with 20 second timeout
3 Grant MOH with 30 second timeout
4 Grant MOH with 40 second timeout
5 Grant MOH with  minute timeout
6 Grant MOH with 2 minute timeout
7 Grant MOH with 3 minute timeout
8 Grant MOH with 4 minute timeout
9 Grant MOH with 6 minute timeout
0 Grant MOH with 8 minute timeout
 Grant MOH with 2 minute timeout
2 Grant MOH with 6 minute timeout