Runco CX-40HD - Manual (Page 24)

Installation
14 Runco CX-40HD/CX-46HD Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup Table 3-1 gives a quick overview of the Crystal Series LCD Display installation process.
The sections following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the Crystal Series LCD Display on a wall (optional) 15
2 Connect signal sources to the Crystal Series LCD Display 16
3 Connect external controller to RS-232 port (optional) 23
4 Apply power to the Crystal Series LCD Display 25
5 Change the OSD language 25
6
If using the Crystal Series LCD Display with a PC, adjust PC
display properties 26
7
Display calibration: adjust the following for each input;
save settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Input position 29 through 41
Note