Rosewill RNX-N4 - Manual (Page 25)

Wireless Adapter RNX-N4 User Manual
25
• Select the Push Button radio button and then click on the Next button.
• Press the WPS button on the device (which is located on the left side of the front panel) and
then click on the Next button.
5. WIRELESS NETWORK SETUP WIZARD
This wizard will guide you in the configuration of the wireless network settings such as the SSID
and security (WEP/WPA).
.Please refer to Chapter 6 in order to configure the more advanced features of the device
5.1 LOGGING IN
• To configure the device through the web-browser, enter the IP address of the device (default:
192.168.1.2) into the address bar of the web-browser and press Enter.
• Make sure that the device and your computers are configured on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
• After connecting to the IP address, the web-browser will display the login page. Select
Admin from the drop-down list and then leave the password field blank. Click on the Log In
button to continue.
5.2 WIRELESS NETWORK SETUP
• Click on the Wizard_Wireless link under the Basic menu, and then click on the Wireless
Network Setup Wizard button.