Rosewill RNX-N4 - Manual (Page 55)

Wireless Adapter RNX-N4 User Manual
55
• Enable: Place a check in this box to enable the routing table entry.
• Name: Specify a name for the rule.
• Destination IP: Specify the destination IP address.
• Netmask: Specify the subnet mask for the IP address.
• Gateway: Specify the IP address of the gateway.
• Metric: Specify the number of routing hops. The route metric is a value from 1 to 16
that indicates the cost of using this route. A value of 1 is the lowest cost, and 15 is the
highest cost. A value of 16 indicates that the route is not reachable from this router.
When trying to reach a particular destination, computers on your network will select the
best route, ignoring unreachable routes.
• Interface: Select the interface from the drop-down list.
• Click on the Save button to insert the entry into the Routing table.
6.3.7 Access Control
• The Access Control section allows you to control access in and out of devices on your
network. Use this feature as Parental Controls to only grant access to approved sites,
limit web access based on time or dates, and/or block access from applications such
as peer-to-peer utilities or games.
• When Access Control is disabled, every device on the LAN has unrestricted access to
the Internet. However, if you enable Access Control, Internet access is restricted for
those devices that have an Access Control Policy configured for them. All other devices
have unrestricted access to the Internet.