Rosewill RNX-N4 User Manual
Page 92
Wireless Adapter
RNX-N4 User Manual
92
UPNP
WAN Static
IP
DHCP Client
PPPoE
PPTP
Clone MAC
DNS Relay
DDNS-8 Verified Services
Router NAT/
NAPT
Static Routing- RIPv2
Dynamic Route
Virtual server mapping
IP address mapping
Port Forwarding
Port Triggering
MAC address Filtering
ALG(Application Layer Gateway) support (RTP/RTSP, AOL, FTP, ICMP,
WMP/MMS, NetMeeting, SIP)
Firewall Blocking
Ping
ICMP Bolcking
SPI (Stateful Packet Inspection)
Rule Based (IP Address Ranges, Port Ranges & Schedule)
DMZ (Demilitarized Zone) Host
Policy Based Parental Controls
Time Based Internet Access
Port Range / Service Filtering
Internet Domain Restriction
Dynamic URL Filtering (OEM subscription service)
VPN
VPN pass-through (PPTP, L2TP, IPSEC)
Wireless
64/128 bit WEP Encryption
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
Wi-Fi Protection Setup (WPS)
Auto Channel Selection
QoS WMM
Intelligent Stream Handling/Wireless Intelligent Stream Handling
Automatic Traffic Classification & Prioritization
Dynamic Traffic Shaping & Packet Fragmentation
Automatic Configuration
Management
Configuration Web-based
configuration
(HTTP)
Firmware Upgrade
Upgrade firmware via web-browser
Administrator Setting
Administrator password change
Idle time out
Reset Setting
Reboot
Reset to Factory Default
System monitoring
Status and Statistics, Time Zone & NTP Client, Event Log, Email
Alarm