Rhino Mounts 1594 - Manual (Page 38)

ASSEMBLY
1594 01/11 Assembly Section 3-4
© 2011 Alamo Group Inc.
ASSEMBL
Y
Installing Left and Right Midmounting Brackets
1. Unfasten valve mount from right side of tractor frame and remove spacer.
2. Lift right and midmounting bracket (1) with overhead hoist. Fasten right midmounting bracket and valve
mount (1) to tractor casting and front axle housing using HHCS M16 x 40 (7) and M16 lockwashers (10).
3. Raise lift midmounting bracket (2) with overhead hoist. Fasten left midmounting bracket (2) to tractor
casting and front axle housing using HHCS M16 x 40 (7) and M16 lockwashers (10).
4. Attach back axle bar (3) to bottom of uprights and to the back of axle of the tractor. Repeat on the other
side.
Installing Grille Guard
1. Position grille guard (4) on front of tractor.
2. Secure with Hex bolts M14 X 25 MM (5) and M14 Lockwashers (6).
3. Torque bolts after all have been installed using General Torque Specifications (See Torque for Fasteners
in Maintenance Section).