Roland TD-20K - Manual (Page 18)

18
Specifications
Pad Size: 12 inches
Dimensions: 490 (W) x 400 (D) x 500 (H) mm
19-5/16 (W) x 15-3/4 (D) x 19-11/16 (H) inches
Weight: 7.7 kg
17 lbs
Accessory: Beater
Option: Mesh Head (MH-12)
Pad size: 12 inches
Triggers: 2 (Head, Rim)
Dimensions: 330 (W) x 420 (D) x 112 (H) mm
13 (w) x 16-9/16 (D) x 4-7/16 (H) inches
Weight: 2.8 kg
6 lbs 3 oz
Option: Mesh Head (MH-12)
* The hoop’s rubber portion is one component that eventually
wears out (the more so if numerous rim shots are performed),
and will require replacement.
Rim shots may not be performed correctly when the rubber
portion is worn out. If this occurs, replace the hoop. Consult
Roland Service for more on replacing the hoop.
Pad size: 10 inches
Triggers: 2 (Head, Rim)
Dimensions: 280 (W) x 360 (D) x 112 (H) mm
11-1/16 (W) x 14-3/16 (D) x 4-7/16 (H) inches
Weight: 2.3 kg
5 lbs 2 oz
Option: Mesh Head (MH-10)
* The hoop’s rubber portion is one component that eventually
wears out (the more so if numerous rim shots are performed),
and will require replacement.
Rim shots may not be performed correctly when the rubber
portion is worn out. If this occurs, replace the hoop. Consult
Roland Service for more on replacing the hoop.
Size: 15 inches
Triggers: 3 (Bow/Bell/Edge)
Connectors: BOW/BELL Output Jack,
BOW/EDGE Output Jack
Dimensions: 376 (W) x 376 (D) x 50 (H) mm
14-13/16 (W) x 14-13/16 (D) x 2 (H) inches
Weight: 1.6 kg
3 lbs 9 oz
Accessories: Wing Nut, Felt Washer, Stopper, Cable Tie
Size: 14 inches
Triggers: 2 (Bow/Edge)
Connector: BOW/EDGE Output Jack
Dimensions: 352 (W) x 352 (D) x 48 (H) mm
13-7/8 (W) x 13-7/8 (D) x 1-15/16 (H) inches
Weight: 1.4 kg
3 lbs 2 oz
Accessories: Wing Nut, Felt Washer, Stopper, Cable Tie
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
KD-120 (V-Kick Trigger Pad)
PD-125 (V-Pad)
PD-105 (V-Pad)
CY-15R (V-Cymbal Ride)
CY-14C (V-Cymbal Crash)
TD-20K_e.book 18 ページ ２００６年１２月７日 木曜日 午前９時２４分