Radio Shack SYSTEM 440 - Manual (Page 13)

13
CONNECTING TO A PHONE
1. Disconnect the tele-
phone line cord from
the phone.
2. Plug the line cord into
the module’s WALL
jack.
3. Plug one end of the
supplied line cord into
the module’s
PHONE
jack.
4. Plug the other end into the phone’s jack.
Note: If this is not your only Caller ID product, see “Adding Additional
Modules” on Page 16.
Supplied
Line
Cord
PHONE
WALL
43-974.fm Page 13 Monday, August 16, 1999 4:27 PM