Mounting the module – Radio Shack SYSTEM 440 User Manual
Page 17
17
All System 440 modules are set up as the
MAIN
module. If you install
additional modules, you must program each additional module as an ex-
tension (
EXT
) module, or incoming calls might be disconnected. Follow
these steps to program an additional module as an extension (
EXT
)
module:
1. Hold down both
REVIEW
keys for over 8
seconds until this display appears:
2. Release the
REVIEW
keys and press
DELETE
to set the module as an extension.
The asterisk moves next to
EXT
.
MOUNTING THE MODULE
You can place the module directly on a desk, shelf, or table, or mount it
on a wall. To mount the module on the wall, you need two screws (not
supplied) with heads larger than the holes on the back of the supplied
mounting bracket.
43-974.fm Page 17 Monday, August 16, 1999 4:27 PM