Radio Shack 62 (16-632) - Manual (Page 30)

30
Setting a Timer
Note: If you use a TV/monitor that is connected
to the VCR’s
AUDIO/VIDEO OUT jacks, set the
TV/monitor to the video mode and skip Steps 2
and 3.
1. Turn on the VCR and the TV.
2. Set the TV to the same channel as 3-CH-4
on the back of the VCR.
3. Repeatedly press TV/VCR until VCR
appears.
4. (Model 62 only) Set the audio recording
mode to the desired setting. See “Receiv-
ing/Recording Stereo/SAP Broadcasts
(Model 62 Only)” on Page 28.
5. Load a blank cassette, or one that you
want to record over, into the VCR.
6. Press PROG on the remote control. The timer
setting menu appears on the TV screen.
Or, if you have already entered timer set-
tings, the current settings for up to the first
four broadcasts appear.
Note: If the clock is not set, PLEASE SET
CLOCK BEFORE PROGRAMMING ap-
pears, then the clock setting screen ap-
pears. Set the clock as described in “Manu-
ally Setting the Clock” on Page 16.
7. Repeatedly press PLAY or STOP to select
an empty timer number, then press FAST-F .
This menu appears.
8. Repeatedly press PLAY or STOP to select
the date when you want to record.
To record a broadcast at the same time on
the same day every week, press either but-
ton until
WEEKLY flashes and the desired
day of the week appears.
To record a broadcast at the same time
Monday through Friday, press either button
until
DAILY flashes and MON-FRI
appears.
To record a broadcast at a set time today,
press either button until today’s date
flashes and
TODAY appears.
TE
2:00P 125
STOP CH
SLP
Y
2 : 00 A 08 SP
STOP CH SPD
SELE CT START DATE
DATE START STOP CH
EP
SET : KEY
SELECT : KEY
END : PROG KEY
TODAY
8 SAT --:-- --:-- --
SET : KEY
SELECT : KEY
END : PROG KEY
SELE CT START DATE
WEEKLY --:-- --:-- --
SUN
DATE START STOP CH
EP
SET : KEY
SELECT : KEY
END : PROG KEY
SELE CT START DATE
DAILY --:-- --:-- --
MON-FRI
DATE START STOP CH
EP
16-549.fm Page 30 Tuesday, July 20, 1999 5:04 PM