Radio Shack 32-2057 - Manual (Page 15)

15
Beyond the Basics
using a microphone
Your mixer has a set of tone controls for the microphone so
you can tailor its high and low frequency sounds.
1. For regular sound, leave MIC TREBLE and MIC BASS set to 0.
2. Rotate MIC TREBLE toward +10 to increase, or toward –10 to
decrease high frequency sounds.
3. Rotate MIC BASS toward +10 to increase, or toward –10 to
decrease low frequency sounds.
using talkover
When you are not using your microphone, set OFF/ON/TALKOVER
to OFF. The microphone’s input is turned off and all other
audio input sources are unaffected.
1. To use your microphone, set OFF/ON/TALKOVER to ON. The
microphone sound is mixed equally with the other audio
input sources.
MIC TREBLE
MIC BASS