Radio Shack 32-2057 - Manual (Page 7)

7
The Basics
connecting inputs
connecting power
Connect the mixer’s power cord to a standard AC outlet.
LINE 1, 2, 3, 4 — connect line level inputs from up to four audio
sources to your mixer. Do not connect audio sources with line-level
outputs to the PHONO 1 or PHONO 2 input jacks.
MIC — connect a microphone with a
1 /
4
-inch plug here (not supplied).
GND
PHONO 1/2 — connect up to two low-level audio
sources (turntable) to your mixer. If you connect
a magnetic-cartridge turntable, connect its
ground wire (usually black or green) to GND.