Ricoh AC122 - Manual (Page 59)

G ETTING S TARTED 2.34
6 Select the components to be installed and click Next.
7 After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 9.
8 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
9 Click Finish.
Installing Software for Network Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
method.