Ricoh AC122 - Manual (Page 62)

2
G ETTING S TARTED 2.37
6 Click Finish.
N OTE : After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver. See “Repairing Software” on
page 2.43.
Custom Installation for Network Printing
You can choose individual components to install and set a
specific IP address.
1 Make sure that the printer is connected to your network and
powered on. For details about connecting to the network,
see the System Administration Guide.
2 Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\setup.exe, replacing “X” with the letter
which represents your drive and click OK.