Riverstone Networks WICT1-12 - Manual (Page 166)

9-6 Riverstone Networks RS Switch Router User Guide Release 8.0
Monitoring PoS Ports Packet-over-SONET Configuration Guide
9.5 MONITORING POS PORTS
To display PoS port configuration information, enter one of the following commands in Enable mode:
The following table describes additional monitoring commands for IP interfaces for PoS links, designed to be used in
Enable mode:
9.6 EXAMPLE CONFIGURATIONS
This section shows example configurations for PoS links.
Show framing status, line type, and circuit ID of
the optical link.
sonet show medium
<port list>
Show working or protecting line, direction, and
switch status.
sonet show aps
<port list>
Show received path trace.
sonet show pathtrace
<port list>
Show loopback status.
sonet show loopback
<port list>
Show alarms and errors on SONET ports.
sonet show alarms
<port list>
Display bridge NCP statistics for
specified PoS port.
ppp show stats ports
<port name>
bridge-ncp
Display IP NCP statistics for specified
PoS port.
ppp show stats ports
<port name>
ip-ncp
Display link-status statistics for
specified PoS port.
ppp show stats ports
<port name>
link-status
Display summary information for
specified PoS port.
ppp show stats ports
<port name>
summary