5 vc, 6 port name example, 8 cli and rs configuration example – Riverstone Networks WICT1-12 User Manual
Page 54: Vc -12, Port name example -12, Cli and rs configuration example -12, Figure 3-1, 1000-base-sx line card -12
3-12 Riverstone Networks RS Switch Router User Guide Release 8.0
CLI and RS Configuration Example
CLI and RS Basics
3.7.5
VC
This is the Virtual Channel (VC) number for a Frame Relay interface.
3.7.6
Port Name Example
Following is a 1000 Base-SX line card with two gigabit ports:
Figure 3-1 1000-Base-SX line card
This line card resides in slot 7 of an RS 8000. The names of the two ports from left to right are gi.7.1 and gi.7.2.
3.8
CLI AND RS CONFIGURATION EXAMPLE
The configuration will demonstrate how to set:
•
The system time and date
•
The daylight saving time
•
The system name
•
The system location
•
The contact name (the person to contact regarding this RS)
•
The IP address for the management port
•
The terminal display (horizontal and vertical)
•
The history buffer
•
A login banner
Hot
Swap
2
1
Online
Offline
Rx
Tx Link
AN
Rx
Tx Link
AN
Gigabit port
Gigabit port
1000BASE-SX
G8M-GSXB1-02