Radio Shack CID-947 - Manual (Page 12)

12 Preparation
Follow these steps to connect two CID-947 modules to a two-
line phone.
1. Disconnect the telephone line cord from the modular phone
jack (on the wall) and plug it into L1+L2 on the triplex
adapter.
2. Plug the triplex adapter into the modular phone jack.
3. Plug one end of the supplied line cord into the TO LINE jack
on one of the modules.
4. Plug the other end of the cord into either L1 or L2 on the tri-
plex adapter.
5. Repeat Steps 3 and 4 to connect another module to the
remaining open jack (L1 or L2) on the triplex adapter.
Triplex
Adapter
L1 L2
L1+L2
43-947.fm Page 12 Thursday, May 25, 2000 11:36 AM