Radio Shack CID-947 - Manual (Page 16)

16 Preparation
CHOOSING A LANGUAGE
Your module is programmed to display messages in English,
but you can change it to display in French or Spanish.
1. Hold down REVIEW and CALL BACK for about 3 sec-
onds until the current language ( ENGLISH , ESPANOL for
Spanish, or FRANCAIS for French) appears.
2. Repeatedly press REVIEW until the language you want
appears, then press REVIEW to set the language you
selected.
Note: If you do not press any button within about 10 seconds,
the time (if set) appears.
SETTING YOUR LOCAL AREA CODE
1. Hold down REVIEW and REVIEW together until
LOCAL AREA CODE appears.
2. To change the area code’s first digit, repeatedly press
REVIEW until the desired digit appears, then press
ERASE to confirm.
3. Repeat Step 2 to set the area code’s second and third digit.
4. To set the area code, do not press any button. Or, press
REVIEW to set the module to its idle mode.
43-947.fm Page 16 Thursday, May 25, 2000 11:36 AM