Ricoh G413 - Manual (Page 36)

VRS Getting Started Guide
32 Kofax Image Products
Table 4. Invalid Characters for Profile Names
Character Description Character Description
: Colon ' Single quotation
; Semicolon " Double
quotation
\ Backslash > Greater than
/ Slash < Less than
| Pipe ^ Caret
& Ampersand . Period
? Question mark
! To change the active profile
1 From the VRS Interactive Properties dialog, select the Profiles tab.
2 From the Available Profiles list, select the profile you want to use.
3
Select the Load button.
Note: If an image is open in the VRS Viewer when you change the active profile, the
image is refreshed with the new settings.
or
1 From the VRS Interactive Properties dialog, select the Profiles tab.
2
From the Available Profiles list, double-click the name of the profile you want to use.
or
1 From the VRS menu, select the Profiles command.
2
When the Profiles submenu opens, select the name of the profile you want to use.
Note: If you change the active profile, it stays in effect for the current VRS session. Each
time you start VRS, Default settings is reset as the active profile.
! To remove a profile from the Available Profiles list:
1 From the VRS Interactive Properties dialog box, select the Profiles tab.
2 From the Available Profiles list, select the profile(s) you want to remove.
3
Select Remove. The profile name clears from the Available Profiles list.