Resetting vrs – Ricoh G413 User Manual
Page 42
Advertising
VRS Getting Started Guide
38
Kofax Image Products
Resetting VRS
The Reset command reloads the default configuration for the Adrenaline Hardware Accelerator
in your PC. You should use the Reset function only if an authorized member of the Kofax
technical support staff instructs you to do so.
!
To reset the VRS configuration
1
From the Windows taskbar, right-click on the VRS icon to open the VRS menu.
2
From the VRS menu, select the Reset command.
A progress indicator appears for a few moments as the configuration is reset for the
Adrenaline Hardware Accelerator.
3
From your scanning application, reselect the VirtualReScan Source.
4
Proceed with your scanning session.
Advertising