Rosewill RNX-N250UB - Manual (Page 34)

Wireless N Adapter RNX-N250UB User Manual
.1.1.3 Advance
urations for this adapter. This tab is used to
onfigure Tx burst, WMM, and CCX.
4
Here you can find the Advanced config
c
Figure 4-7
Figure 4-8
Defin
.
Ena checkbox to enable TCP window size,
Fas kbox to enable fast roaming. Specify
Sho
cation Status Dialog displays the process about
Ena
only be applied when connecting to a Cisco compatible device.
(XP only)
.1.1.4 Statistics
l
ition of Each Fields in Advance:
Wireless mode: Click the drop list to select a wireless mode.
Enable TX Burst: Select to enable connecting to a TX Burst supported device
ble TCP Window Size: Mark the
which help enhance throughput.
t Roaming at __ dBm: Mark the chec
the transmit power for fast roaming.
w Authentication Status Dialog: Mark the checkbox to show
“Authentication Status Dialog” while connecting to an AP with
authentication. Authenti
802.1x authentication
ble CCX (Cisco Compatible extensions): Select to enable CCX. This
function can
4
Provides you with information on your wireless adapter. Statistics displays the detai
34