Rosewill RNX-N250UB - Manual (Page 50)

Wireless N Adapter RNX-N250UB User Manual
packet.
Fragment Threshold: Place a check in this box if you would like to enable Fragment
Threshold. Any packet larger than the specified value (bytes) will be fragmented.
Click on the OK button to save the changes.
4.2.4 Authentication and Security
The Security tab allows you to configure the authentication and encryption settings such as:
WEP, WPA-PSK, WPA2-PSK and 802.1x. Each security option is described in detail below.
4.2.4.1 WEP Encryption
The WEP tab displays the WEP settings. Encryption is designed to make the data
transmission more secure. You may select 64 or 128-bit WEP (Wired Equivalent
Privacy) key to encrypt data (Default setting is Disable). WEP encrypts each frame
transmitted from the radio using one of the Keys from a panel. When you use WEP to
communicate with the other wireless clients, all the wireless devices in this network
must have the same encryption key or pass phrase. The following information is
included in this tab, as the image depicts below.
Figure 4-30
Authentication Type: Select Open or Shared from the drop-down list.
Encryption: Select WEP from the drop-down list.
50