Rosewill RNX-N250UB - Manual (Page 55)

Wireless N Adapter RNX-N250UB User Manual
4.2.8 Advanced Configuration
The Advanced tab is used to configure advanced wireless settings.
Figure 4-35
Wireless mode: 2.4Ghz only.
Tx Rate: The transmit rate is set to auto by default.
Tx BURST: Click the check box will enhance the throughput
Click on the Apply button to save the changes.
4.2.9 WPS
WPS (Wireless Push Button) is used for WiFi Protected Setup. By pressing this button, the
security settings of the device will automatically synchronize with other wireless devices on
your network that support Wi-Fi Protected Setup.
55