Ryobi P2600 - Manual (Page 6)

6 7
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection Wear eye protection when operating this equipment.
Safety Alert Precautions that involve your safety.
Gloves
Wear non-slip, heavy-duty protective gloves when handling the
blades.
Moving Parts Keep hands away from moving parts.
50' 15m
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Kickback DANGER! Beware of kickback.
Hot Surfaces
To reduce the risk of injury or damage, avoid contact with any
hot surface.
Electric Shock
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Sharp Blade
Sharp cutting blades. To prevent serious injury, do not touch cutting
blades.