Roland Prelude - Manual (Page 80)

80
fig.MFX-74
fig.MFX-75
fig.MFX-76
74: ENHANCER → DELAY
Parameter Value Description
Enhancer Sens 0–127 Sensitivity of the enhancer
Enhancer Mix 0–127
Level of the overtones generated
by the enhancer
Delay Time 0–2600 ms, note
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Delay
Feedback
-98– +98%
Adjusts the proportion of the de-
lay sound that is fed back into the
effect. Negative (-) settings will
invert the phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not want
to cut the high frequencies, set
this parameter to BYPASS.
Delay Balance D100:0W–D0:100W
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Level 0–127 Output Level
75: CHORUS → DELAY
Parameter Value Description
Chorus Pre
Delay
0.0–100.0 ms
Adjusts the delay time from the di-
rect sound until the chorus sound is
heard.
Chorus Rate 0.05–10.00 Hz, note Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus Balance D100:0W–D0:100W
Volume balance between the di-
rect sound (D) and the chorus
sound (W)
Delay Time 0–2600 ms, note
Adjusts the delay time from the di-
rect sound until the delay sound is
heard.
Delay
Feedback
-98– +98%
Adjusts the proportion of the delay
sound that is fed back into the ef-
fect. Negative (-) settings will invert
the phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this parame-
ter to BYPASS.
Delay
Balance
D100:0W–D0:100W
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Level 0–127 Output Level
Feedback
Delay
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Balance D
76: FLANGER → DELAY
Parameter Value Description
Flanger Pre Delay 0.0–100.0 ms
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Flanger Rate 0.05–10.00 Hz, note Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger Feedback -98– +98%
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Flanger Balance D100:0W–D0:100W
Volume balance between the di-
rect sound (D) and the flanger
sound (W)
Delay Time 0–2600 ms, note
Adjusts the delay time from the di-
rect sound until the delay sound is
heard.
Delay
Feedback
-98– +98%
Adjusts the proportion of the de-
lay sound that is fed back into the
effect. Negative (-) settings will in-
vert the phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the effect
will be cut. If you do not want to
cut the high frequencies, set this
parameter to BYPASS.
Delay
Balance
D100:0W–D0:100W
Adjusts the volume balance between
the sound that is sent through the de-
lay (W) and the sound that is not sent
through the delay (D).
Level 0–127 Output Level
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Flanger
Balance W
Balance W
Balance D
Balance D
Feedback
Prelude_e.book Page 80 Wednesday, January 14, 2009 2:18 PM