Ricoh 70E User Manual

Page 45

Advertising
background image

Preparation for Installation 3-13

II

L

00

4)

Confirm the Paper Guide position of

the High Capacity Hopper. (LT or A4)

Usually, Paper Guide position is set in “LT” at the shipment. When the customer wish to use
the High Capacity Hopper in A4 paper, change the Paper Guide position according to the
following steps.

[Change procedure of the Paper Guide Position]

1.

Open the Front door, and remove two M4 Screws.

2.

Lift up the Paper Guide and move to the outside.

3.

Insert the upper and lower of the Paper Guide to a Guide hole for“A4”. At that time, the Paper
Guide is outside of the Size Guide Sensor.

4.

Fix the M4 Screw in a Screw hole for “A4”.

M4 Screw

Paper Guide

Size Guide Sensor

Front Door

Lower Guide hole
for “A4”(Outside)

A Screw hole
for “A4” (Outside)

Size Guide Sensor

Lower Guide hole
for “A4”(Outside)

A Screw hole
for “A4” (Outside)

A Screw hole
for “LT” (Inside)

Lower Guide hole
for “LT”(Inside)

Paper Guide

M4 Screw

Upper Guide hole
for “LT”(Inside)

Upper Guide hole
for “A4”(Outside)

Upper Guide hole
for “A4”(Outside)

Advertising