Rosewill RNX-GX4 - Manual (Page 18)

Wireless Router RNX-GX4 User’s Manual
18
2.2 Connect test with the Router
After completing the above steps, you can use “Ping” command to test if your
computer has connected with your Router.
h Start Æ Run Æ Type “cmd” Æ Click “OK”
h Type “ping 192.168.1.1” and press Enter
h If you see below message, this means the connection is set correctly.
Your PC/NB is now able to link to your Router.
h If you see below message, this means the connection is not set
correctly. Please check your network connection and setup.