Rosewill RNX-GX4 - Manual (Page 29)

Wireless Router RNX-GX4 User’s Manual
29
3.5.1 Primary AP Setup
3.5.1.1 Router’s Wireless Basic Setup
First please use Cable connection connected to the Wireless Router’s LAN port.
After established the connection and login into the web management page,
please select “Primary AP Setup” option under “Wireless Management”.
Then you should see the same as below diagram. (The default “Wireless
Network Status” is “Enable”.) You can also select to start the “Secondary AP
Setup” which defaults as Disable.
You will need to assign the below wireless options:
h Wireless Network Status:
You can choose “enable” or “disable” to enable or disable the “Wireless
Network Status”, if what you choose is “Disable”, the AP function of
wireless router will be turned off.
h Radio Band:
You can select the wireless standards running on your network, if you
have Wireless-G, and Wireless-B devices in your network, keep the
default setting, 802.11b/g Mixed.
h SSID:
This is the broadcasting name for your wireless connection. You can
change SSID to the name you desire. Your PC/NB will need to connect
to the same SSID that your Wireless Router uses. The Default SSID is
“ROSEWILL”.
h SSID Broadcasting:
Dual-AP Function: We provide Dual-AP function for you to setup two SSID as two wireless networks
for the ease of control on your network management. You can set both Primary AP and Secondary
AP as different Network. The settings for Dual-AP are fundamentally the same.