Rosewill RNX-GX4 - Manual (Page 34)

Wireless Router RNX-GX4 User’s Manual
34
reference)
3.5.1.3 Router’s Host Filter Setup
You can filter wireless users by enable this function; unauthorized users will not
be able to access the network. To enable the “Host Filter” function, please
follow the below steps:
1. Select “Enable” on the “Wireless Access Control Status”; This will
bring up the “Wireless Access Control Rule”
2. Under “Wireless Access Control Rule”, you select two options as
“Permit wireless connection for MAC address listed (others are
Denied)” and “Deny wireless connection for MAC address listed
(others are Permitted)”. They work as white list or black list which
allows you to set as permitted only or deny only. However, these two
options can only be apply at one time.
3. Select to enter the MAC address you want control in the “MAC address”
field. (MAC address should look like AA-BB-CC-DD-EE-FF, but
composed by letters and numbers), then click “Add”, and you will see
the MAC address has displayed in the MAC list.
4. When complete adding the MAC address, please click “Save Settings”,
and filter list will be done.