Roberts Radio RD-25 - Manual (Page 16)

15
Manual tuning - FM and MW
1. Press the On/Off button to switch on your radio.
2. Press the Band button to select the FM or MW band. Fully extend the
telescopic aerial for FM reception. For MW reception there is a built in
ferrite aerial. Rotate your radio to the position giving best reception.
3. Rotate the Tuning control to tune to a station. The frequency will
change in steps of 50 kHz on FM. On MW the frequency will change
in steps of 9 kHz.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume control to the desired settings.
6. To switch off your radio press the On/Off button.
2
1
3
5
6