Roberts Radio RD-25 - Manual (Page 21)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
20
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Switch on your radio.
2. Press and hold in the Tuning control until "Station order" appears on
the display.
3. Rotate the Tuning control until the display shows "Factory reset".
4. Press in and release the Tuning control, the display will show "Press
SELECT to confi rm reset . . .".
5. Press the Tuning control to confi rm. A full reset will be performed and
all presets and station lists will be erased. A quick scan of UK DAB
band III frequencies will be carried out.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
2,3
Display backlight
1. When your radio is powered by the AC adaptor the display backlight
will always be switched on.
2. When powered by batteries the display backlight will only operate
when the radio is switched on.
4,5